A brief introduction to the maintenance knowledge of the toner cartridges of copier toner cartridge manufacturers

In general, when we repair copiers, we cannot avoid dismantling the toner cartridges of Copier Toner Cartridge manufacturers. What should we do if we accidentally break the toner cartridges? Or sometimes, our copiers are used for a long time The Toner Cartridge is aging, what should we do? In fact, the structure of the toner cartridge of many copiers is similar, and the easily damaged parts are nothing more than the drum core, the waste paper window, and the scraper, etc. We need to learn how to repair the toner cartridge Copiers that come in for easy fixes.

The Toner Cartridge of the copier has the problem of work fatigue. Therefore, the continuous working time should not be too long. If the workload is heavy, you can take a break after working for a while before continuing to output.

Regularly clean and maintain the Canon Printer Cartridge. The method is: carefully remove the toner cartridge assembly, wipe the surface with absorbent cotton, but do not use force to prevent the surface of the Newlytoner Cartridge Compatible from being scratched. Then, wipe the surface of the toner cartridge with absorbent cotton dipped in a special cleaner for the toner cartridge. When wiping, use a spiral circle method, and immediately wipe the cleaner with absorbent cotton after polishing. Gently pat a layer of talcum powder on the surface of the drum with gauze containing talcum powder, and then put it back for use.

Usually when replacing toner, pay attention to clean up the waste toner in the waste toner collection bin, and clean up the waste toner bin immediately when you find output [toner leakage". Because when the waste toner accumulates too much, the phenomenon of "toner leakage" will first appear. If you continue to use it, because the waste toner contains paper ash, fibers and other dirt, which is relatively rough, it will rub against the toner cartridge for a long time, and it will become tighter and tighter. As it gets bigger and bigger, the photosensitive film on the surface of the toner cartridge will eventually be worn away, and the toner cartridge will be damaged.

Copier Toner box manufacturers would like to remind everyone that when toner is found to fall outside the equipment during the replacement process, it is best to use a vacuum cleaner to remove it, and then use pure alcohol to scrub it again. In addition, the entire replacement process is best carried out in a darker studio to prevent the photosensitive drum from being exposed. In addition, general toner cartridges are valid for two and a half years when unopened, but once unpacked, the validity period is only 6 months. Users should pay attention to using them within the validity period to ensure copy quality.

For more information, please contact us:
Tel: +86-0750-6108992
Fax: 86-0750-6325993
Mobile: +8613822438293
Mail: sales@jm-jinheng.com